Latest Videos

Galileo is the innovator of a unique breakthrough technology, The Galileo Wheel, which combines a wheel and a track in a single component. The simple mechanism, wheel to track, or track to wheel, enables switching back and forth between the two modes within seconds. The technology provides the benefits of both traditional transport elements: the wheel with its energy efficiency, smooth ride, maneuverability, minimal footprint and suitability for high speeds, and the tracks with their superb traction for overcoming obstacles, towing capability, smoothness of ride over rough terrain and the capability to climb up and down stairs. Mobility needs analysis of tracked vehicles, specifically tracked robots, whether large or small, shows that the majority of these would be better off on wheels most of the time, but for a short yet critical portion of their intended operation, must be on tracks to achieve their mission. Galileo has developed the ideal mobility platform for robots, vehicles, wheelchairs and any...

At Carnegie Mellon University, Professor Burak Ozdaganlar's research focuses on micro- and meso- scale manufacturing. The interest in small components and small features has been rapidly increasing. Biotech, biomedical, optics, aerospace, military, defense, security, automotive, microelectronics packaging, and communication industries have been increasingly demanding miniature products and miniature features in larger products. This demand mainly arises from the potential advantages of miniaturization: multiple functionality; weight, space, and material savings; strategic placement/configuration availability; increased reliability; and other, currently non-existent capabilities. The development of complex micro devices necessitates efficient and economical creation of sophisticated mechanical structures with 3D geometrical features made from a diverse selection of materials.

Hosted by: Lee Teschler Videography by: Terry Knight Edited by: Curtis Ellzey

Paul Whytock from Electronic Design Europe talks with Chris Paris from AWR Corporation about their latest release of Microwave Office 2010 from European Microwave Week 2010. For more information, visit AWR.

Hosted by: Paul Whytock Videography by: Paul Milnamow Edited by: Terry Knight

The TriQuint T1G6000528-Q3 is constructed with TriQuint's proven 0.25 μm production process, which features advanced field plate techniques to optimize power and efficiency at high drain bias operating conditions. For more information, visit TriQuint Semiconductor.

Hosted by: Paul Whytock Videography by: Paul Milnamow Edited by: Curtis Ellzey

Paul Whytock from Electronic Design Europe talks with Guillaum De Giovanni of Noise XT about what makes their DCNTS phase noise test system unique from European Microwave Week 2010. For more information, visit Noise XT.

Hosted by: Paul Whytock Videography by: Paul Milnamow Edited by: Terry Knight

The next generation of Procerus' Kestrel Autopilot v3.0 features higher end sensors, a blazing DSP processor, and advanced guidance & control for hovering UAV platforms. This video also features multi-rotor air vehicles in flight that utilize the Kestrel Autopilot system, such as the Hex R&D platform and the CyberQuad Maxi hovering craft. For more information, visit Procerus Technologies.

Hosted by: Bill Wong Videography by: Curtis Ellzey Edited by: Curtis Ellzey

Paul Whytock from Electronic Design Europe talks with Paul Wilson of NXP about three new LDMOS-based products designed for vibration intense conditions from European Microwave Week 2010. For more information, visit NXP.

Hosted by: Paul Whytock Videography by: Paul Milnamow Edited by: Terry Knight

Paul Whytock from Electronic Design Europe talks with Paul Wilson of Analog Devices about four new IF and RF VGAs available from ADI including the ADL5201 and ADL5202 for IF and the ADL5240 and ADL 5243 for RF from European Microwave Week 2010. For more information, visit Analog Devices.

Hosted by: Paul Whytock Videography by: Paul Milnamow Edited by: Terry Knight

TORC is a leading provider of robotic building blocks for developers and integrators of robotic systems that enable engineers to rapidly integrate robotic systems through a suite of modular, customizable products. Michael Fleming, CEO, takes us on a tour of those systems as well as how they are integrated into the Ground Unmanned Support Surrogate (GUSS) vehicle developed with the cooperation of the Marine Corps Warfighting Laboratory. For more information, visit TORC.

Hosted by: Bill Wong Videography by: Curtis Ellzey Edited by: Curtis Ellzey

Richard Halliday, Director of Distribution Products at Lumex, talks with Electronic Design's Joe Desposito about their LED and LCD offerings, R&D, and more at the 2010 NEDA Executive Conference. For more information, visit Lumex.

Hosted by: Joe Desposito Videography by: Curtis Ellzey Edited by: Curtis Ellzey