Halton has opened a webshop for the UK building services industry!
News
Flkt Woods has raised the bar for fan manufacturers worldwide, utilising turbo-machinery technology it has achieved landmark EN12101-3 certification for 400oC for 2 hours (F400) on its range of large axial fans up to 2.8 metres in diameter by successfully testing a fan 1MW 1500 rpm, 2.24 metres in diameter.
The Natural Ventilation Solution
The fundamental difference between more commonly used mechanical
ventilation and natural ventilation is the use of encapsulated wind power to fully ventilate the building.
Our system works on the basis of natural fresh air entering the building through various wall mounted units with modulating control dampers. The air passes throughout the building via a series of grilles and dampers allowing for a controlled environment purely using fresh air eliminating the need for a costly mechanical arrangement. The stale air leaves the
building via several roof turrets.
An in-duct evaporative humidifier and cooler delivering humidity control and up to 12C of adiabatic cooling to an air handling unit from just 0.5kW of electricity.
ENJOY THE MOST BEAUTIFUL OUTDOOR HEATER WITH ITS SLIM, ELEGANT PROFILE AND DISTINCTIVE CURVE
The CSS circular smoke and fire damper is the latest development to join the Actionairs innovative and tested range of damper products.
The damper has been developed for installing into standard circular spiral duct systems where the duct passes through, up to 2 hour rated walls. The easy fit flange system makes the installation quick and simple.
The CSS is available in a number of circular sizes to suit 50mm thermal insulated or non insulated ductwork, and is supplied with a factory fitted control mode, with Electrical Thermal Release (ETR) as utilised on our Smoke, Vent / Shield ranges.
North-east Scotland-based EPIT is an accredited CompEx approved training centre. The CompEx five-day course and its affiliations have been added to their already comprehensive training portfolio, and...
The new G400-MP2 pump from GfG (Germany) communicates with the gas detectors G450/G460. This interaction allows fault indication via the detector display. Low battery, blocked sampling line or interru...
City Technology (UK) has enhanced and extended its premium Sensoric family of hydride exotic gas sensors. Certain hydride gases, notably arsine, silane, phosphine, diborane and hydrogen selenide, play...
Gas sampling and conditioning in hazardous areas can be extremely challenging for operators and providers of analytical measurement systems. In order to provide reliable and auditable systems there ne...