Roy Fallon, chief operator of the wastewater treatment plant at the Village of Tequesta in Palm Beach County, Fla., said that after the company installed two reverse osmosis systems back in 2000, it w...
News
The SPIRALIFT SL from Franklin Miller (USA) provides fine screening, washing, transporting and compacting of wastewater solids while leaving essential organics in the flow. The SL is easy to install i...
Berson’s (The Netherlands) new UV-Tronic+ V5 PLC controller links to a UV disinfection system’s SCADA control system and allows users to set up and manage the UV system’s operating p...
With joint venture partners Morgan Est, Grontmij has secured a contract with Yorkshire Water covering the next Asset Management Period. Yorkshire Water manages the collection, treatment and distributi...
Halton has opened a webshop for the UK building services industry!
Flkt Woods has raised the bar for fan manufacturers worldwide, utilising turbo-machinery technology it has achieved landmark EN12101-3 certification for 400oC for 2 hours (F400) on its range of large axial fans up to 2.8 metres in diameter by successfully testing a fan 1MW 1500 rpm, 2.24 metres in diameter.
The Natural Ventilation Solution
The fundamental difference between more commonly used mechanical
ventilation and natural ventilation is the use of encapsulated wind power to fully ventilate the building.
Our system works on the basis of natural fresh air entering the building through various wall mounted units with modulating control dampers. The air passes throughout the building via a series of grilles and dampers allowing for a controlled environment purely using fresh air eliminating the need for a costly mechanical arrangement. The stale air leaves the
building via several roof turrets.
An in-duct evaporative humidifier and cooler delivering humidity control and up to 12C of adiabatic cooling to an air handling unit from just 0.5kW of electricity.
ENJOY THE MOST BEAUTIFUL OUTDOOR HEATER WITH ITS SLIM, ELEGANT PROFILE AND DISTINCTIVE CURVE
The CSS circular smoke and fire damper is the latest development to join the Actionairs innovative and tested range of damper products.
The damper has been developed for installing into standard circular spiral duct systems where the duct passes through, up to 2 hour rated walls. The easy fit flange system makes the installation quick and simple.
The CSS is available in a number of circular sizes to suit 50mm thermal insulated or non insulated ductwork, and is supplied with a factory fitted control mode, with Electrical Thermal Release (ETR) as utilised on our Smoke, Vent / Shield ranges.