Explore Hazardous Area Regulations and Standards
Weighing equipment and control terminals operating in hazardous areas must meet stringent safety criteria and be compliant with several regulations, standards and directives.
METTLER TOLEDO’s weighing solutions are designed and approved to ATEX, FM, and IECEx global safety standards. The new white paper, Safety Competence - Hazardous Area Regulations and Standards, outlines: (Read More)
Belzona Pioneers New Generation Of Erosion Resistant Coatings
Superior erosion protection can now be achieved without causing damage to spray equipment
Belzona, world leader in the design and manufacture of polymer repair composites and industrial protective coatings, has pioneered a new generation of spray applied filler free polymer alloy that provides the robust protection of a ceramic coating without causing wear or damage to spray equipment. (Read More)
Maintec 2014 - 11 - 13 March 2014
Maintec is the UK's leading show for maintenance, plant and asset management and provides an annual forum for industry professionals from the maintenance community to network, do business and be inspired.
Now in its 39th edition, Maintec continues to be THE industry event for visitors to see the latest technology providing cost-cutting solutions, increasing productivity and higher ROI for their business.
Maintec is free to attend, and your badge also gives you access to Facilities Management 2014, a brand new event for facilities professionals, and The Health & Safety event. To register and find out more please visit: http://www.easyfairs.com/maintecuk
The uses of compressed air are pretty much universal from pumping up your car tyres to sophisticated control systems for industrial processes. In the medical sphere compressed air is used to operate simple mechanical devices such as drills and saws, ventilators and as a carrier gas in anaesthesia and inhaled medications. Compressed air at source is ambient air which has passed through a mechanical device(the compressor) which in industrial applications sometimes comes into contact with the lubricating oil. In more “quality” applications the compression chamber is usually dry of any lubricating medium.
Compressors are responsible for 10% of all the power consumed in a mature industrial society like the UK and Ireland. Frequently 10% or more of this air will be wasted because of leakage caused by poor maintenance, bad design of air lines, acidic condensate attacking seals and joints just to name a few of the possibilities. Therefore it makes sense to do regular audits on the power consumed, flow, pressure, dew point and leakage as a starting point. Is this commonly done? Matthew Harrison, Regional Sales Manager at BEKO TECHNOLOGIES says, “No this type of extensive measurement is rare but smart companies are realising that you can’t know too much about what is happening within your compressed air network. You can avoid problems and be sure that you are operating to an efficiency that is acceptable if you regularly even better have a permanent output of key parameters within the system. Now that the BEKO Data Logger is available it is very easy for me and BEKO TECHNOLGIES colleagues to monitor up to 12 outputs per BDL installed which is plenty for the normal compressed air system.
A & B Air Systems and BEKO TECHNOLOGIES have helped lower costs at a leading European food manufacturer. Their customers are most of the leading high street food chains.
The quality of compressed air is always an important topic in food production. At one site there are 2 compressor systems; the high quality oil free and dried to -40°C pressure dew point for the air which is in contact with the product and a general purpose stream for operation of pneumatic components which comes from lubricated compressors with filters to 0.01ppm oil carry over and +3°C pressure dew point.
Compressed air is said to be responsible for approximately 10% of the power usage in the UK and other mature economies. BEKO TECHNOLOGIES are a leading company in the treatment of compressed air and management of condensates. Another major part of the business is measurement systems. BEKO TECHNOLOGIES are well equipped with experienced technical sales personnel to help businesses improve their efficiency of compressed air usage. We have put together a list of top tips:
In the field of condensate technology, there is also news at the COMVAC HANNOVER 2013 at BEKO TECHNOLOGIES: the upgrade version of the BEKOMAT 31, 32, and 33 condensate drains with improved serviceability.
The upgrade version of the BEKOMAT 31/32/33 series has an integrated service indicator which informs you of upcoming maintenance in a timely manner. The employment of a multi-voltage power supply unit for the energy supply from 85 to 265 Vac, at 50-60Hz, reduces the variants. With the higher protection class IP67, the condensate drains are not only reliably protected against the admission of dust, they are also sealed to such an extent that temporary submersion in water will not damage them. Therefore, they are an ideal solution for the most severe ambient conditions.
At the COMVAC HANNOVER, BEKO TECHNOLOGIES presented the innovative variant of the EVERDRY FRA-V 2000C adsorption dryer. The special feature of this design is the modular concept, which allows for the separation of the adsorber containers from the pipework module, and for the reconnection in just a few steps. Through this structure, even larger plants can be packed in standard sea containers. This drastically reduces the transport and packaging costs and offers optimum protection to the plant during long sea journeys.
FAST
Thanks to a smart design and low weight materials, AIRnet can be installed 70% faster than conventional systems.
EASY
AIRnet pipes and fittings are assembled in just a few steps by a single installer, without the need for heavy machinery.
RELIABLE
The durable, corrosion-free AIRnet pipes and fittings come with a 10-year warranty. Low friction and seamless connections minimize pressure drop.
