XHR300/301 series recertified and introduces IECEx Prime Certification
Building their current product certification, Pressure Tech is pleased to announce that we have recertified our XHR300/XHR301 pressure regulators against the latest revisions of the relevant EN 60079 and EN 13463 series of standards and achieved IECEx prime certification.
For regulators used in analyser systems, especially on hydrocarbon gases that require large pressure reductions, (Read More)
Protect Your Business from Frost This Winter
Winter is nearly upon us. Have you performed your annual check to ensure your existing business processes, production equipment and manufacturing facilities do not suffer as a result of icy weather and freezing temperatures?
Winter weather can lead to equipment failure, frozen tanks and ruptured pipes. Our below checklist contains five key areas we advise clients to review before the winter weather sets in. (Read More)
Dialight SafeSite® LED Area Light Now IECEx/ATEX Zone 2, 22 Certified for Hazardous Locations
New SafeSite for EU Market Delivers 105 lumens per Watt in Industry’s Most Efficient, Zero-Maintenance, Lightweight Fixture
Dialight (LSE: DIA.L), the innovative global leader in LED lighting technology, today announced its SafeSite® LED Area Light is now IECEx /ATEX Zone 2, 22 certified for use in hazardous locations, namely chemical, petrochemical, power generation and mining applications. (Read More)
ATEX Approved, Manual Control Dosing Pumps
Wanner International has introduced a range of Hydra-Cell, ATEX approved Dosing Performance Pumps with precise mechanical variator control, all mounted on a substantial stainless steel base plate.
These seal-less pumps are designed for use in ATEX classified environments, coupled to compatible, explosion proof motors, completely removing the need for complex and costly external VFD ATEX control. (Read More)
Wyndham Page, the diesel engine protection equipment manufacturer, has launched new ranges of mechanically actuated automatic overspeed air intake shutdown valves and solenoid actuated butterfly shutdown valves for the diesel engine safety market.
These new products are available in a wide range of sizes and are both lightweight and compact. (Read More)
E2S introduces SIL 2 certified BEx alarm horn sounders and Xenon strobe beacons
E2S Warning Signals, the leading independent audible and visual warning signals manufacturer, has introduced a SIL 2 version of its flagship BEx range of explosion proof alarm horn sounders and Xenon strobe beacons. The new IECEx and ATEX certified BEx horns and strobes are the perfect solution for designers and integrators of SIL 2 systems; they are designed and tested to ensure a 99.9% reliability rate, bringing plant safety to new levels. To meet the requirements of SIL 2, a combination of software and hardware in the new units accurately monitors and interprets the sound output of the horn or the light output from the Xenon strobe to check it is functioning correctly. The fault monitoring reports back to the control panel utilising either separate fault contacts or by the introduction to the monitoring circuit of a series resistor. Using the series resistor facility eliminates the need for any additional cables and can be used in a standard two-wire arrangement.
E2S Warning Signals, the world’s leading independent manufacturer of audible and visual warning devices, recently renewed its Russian Fire Certificate applying to a series of popular products.
The extended Certificate of Conformity to GOST 53325 -2012 issued by Fire Safety Technologies, the independent Russian Approval authority, is valid until July 2018 and is applicable over 50 different explosion proof, intrinsically safe and general industrial product versions from the comprehensive E2S portfolio. Alarm horn sounders, L.E.D. strobe beacons, combined audible-visual warning units, PA loudspeakers and manual call points comply to the Russian standards, giving fire system designers, integrators and installers the widest choice and assurance.
Milton Keynes, October 10, 2015: Seminar and workshop from ABB Robotics helps SMEs form an automation strategy that achieves ROI
ABB Robotics will be running the latest in its popular ‘Switch to Robots’ seminar and workshop events (bit.ly/s2rNovember), explaining the benefits that robotic automation can bring for SME companies and how to find, implement and run the best robotic solution.
BEKO TECHNOLOGIES will be starting the new year in new premises. After nearly a year of searching BEKO TECHNOLOGIES UK will move to Redditch.
Not only will these new premises give a much improved work environment for the UK team, but we will create a first class training and education facility where we can educate current and potential customers, demonstrating our equipment in a live environment giving much needed practical hands on learning.
BEKO TECHNOLOGIES, one of Europe’s leading manufacturers of compressed air equipment, has appointed Ben Johansen as regional sales manager for the south east of England to handle sales and aftersales customer support. As the key point of contact for end users, distributors, and OEM’s, Ben will be responsible for promoting sales through maintaining and developing new business relationships.
