News

The imperative in industry to cut energy costs and reduce green house gases is good news for suppliers of high efficiency motors. However, the projected efficiency gains from using EFF1 or 2 type machines will not be achieved if motor system and supply problems that existed before they were installed are not resolved. One of the most common of these is low power factor.

Motors operated with low power factors are expensive and inefficient. In the worst cases this can result in utility supply companies having to increase their generation and transmission capacity to handle the reactive power component caused by inductive loads. There is a price for this: in the UK, the threshold value for power factor is 0.85, below this figure industrial users are generally charged more by their suppliers.

The new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.

The new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.

The new belt tension tester from Econobelt uses sound waves instead of force deflection to accurately measure tension. The portable, lightweight and easy-to-use meter produces repeatable results for any operator. It can be used in almost any environment and produce fast results, calculated in seconds. The unit, identified as the 507C runs on four AAA batteries.

The Model 507C comes with a cord sensor. Optionally available are an inductive sensor or a flexible sensor, and a cord sensor. At the new Econobelt eStore you can get immediate quotes, download a 3D model, and place online orders.

The Fastening & Assembly Solutions Exhibitions are specialist niche events that tend to reflect the health of the UK manufacturing industry

Oil level indication is a vital part of any system and requires a quick and simple checking procedure. Ideally a quick visual sight check during other regular maintenance

Corus Process Engineering (CPE), part of Corus Northern Engineering Services (CNES) has successfully completed the manufacture and assembly of two, six-metre diameter steel lifting girdles that will be used to remove (lift and tail) the 400-tonne heat exchangers from the reactors at Calder Hall nuclear power plant in Cumbria.

Each reactor has four vertically mounted heat exchangers. These are located externally to the reactor building and were clad for insulation and weather protection. The heat exchangers weigh around 400 tonnes and measure 27m in length with a diameter of 5.5m. This will represent the largest ever lift in the UK nuclear industry. CPE delivered the lifting girdles to its customer Nuvia Limited (formerly NUKEM Limited) at the end of February 2008. Nuvia is one of several contractors chosen by Sellafield Limited to decommission the Calder Hall site.

CG Flooring Systems (CGFS) provided the perfect solution to a flooring problem for a multi-metal and steel stockholder, Aalco, at their Halesowen plant.

Aalco contacted CGFS with their flooring brief which required an initial survey. The                recommendation by CGFS was for slab and joint repairs, to be followed by the installation of a 10mm fast track cementitious pump screed for the warehouse flooring area.

It was discovered during the initial slab repairs that the concrete slab was not thick enough or strong enough to meet the client

CG Flooring Systems (CGFS) has successfully completed its biggest and most demanding project