News

By introducing change management and version control software for all industrial programmable devices in its Wakefield manufacturing plant, soft drinks giant Coca Cola Enterprises (CCE) has minimised production downtime, therefore avoiding costly delays and disrupting delivery schedules.

The Wakefield manufacturing plant was built in 1989 as a manufacturing and distribution centre for CCE in the North of England. The plant is the largest soft drinks factory in Europe, covering an area of 41 acres and has 72,000 square metres under of buildings.

A range of hazardous area equipment, including fluorescent emergency lighting units, stop-start pushbut-tons, connectors and terminal boxes manufactured by Cooper Crouse-Hinds, is being used on dust containment booths destined for the pharmaceuticals, chemicals and biotech markets.

Based in Huddersfield, Extract Technology designs and manufactures a range of

A range of hazardous area equipment, including fluorescent emergency lighting units, stop-start pushbut-tons, connectors and terminal boxes manufactured by Cooper Crouse-Hinds, is being used on dust containment booths destined for the pharmaceuticals, chemicals and biotech markets.

Based in Huddersfield, Extract Technology designs and manufactures a range of

More and more people are switching on to infrared for inspection and it

Energy savings, especially in the current economic climate are high on the agenda of all industry sectors, so components which offer, amongst other features, a precise and economical performance, are likely to be the preferred choice. Deltaflow flow meters recently introduced by FLOWLINE, meet these requirements for measuring media in gas, steam and liquid applications.

Deltaflow is a differential pressure probe which measures the flow in pipes and conduits and can be used to meter gases, steams and liquids under almost any operating conditions and across a broad spectrum of industries.  

For example, in power plants Deltaflow meters all gaseous media reliably and precisely, including feed air, preheated air, recycled stack gas and flue

gas. In addition, it can meter media with extremely high particulate contents of <200g/m3,  (when used with the LSP air purifier attachment), live steam,

 low / medium-pressure steam and feed water, all tested per PED97/23/EG with CE certification.

The meters can also be used in chemical and petrochem industries for metering products, exhaust or flue gasses, inert or aggressive media. Deltaflow is

also ideal for measuring biogases and sewage gasses in the water and wastewater treatment industries.

In power plant applications, such as metering steam or feed water, the energy savings realised from using Deltaflow can ensure a rapid payback.           

                        
With Deltaflow exact measurements are possible of combustion exhausts from boilers and burnout slagging, therefore efficiency levels can be adjusted for

optimum performance. Furthermore, because pressure loss levels are so low, pumps, blowers and compressors with narrower profiles can be used which

results in energy savings.

In chemical and petrochem applications Deltaflow’s high degree of precision and accuracy (better than 1% of measured flow) can contribute toward

increased quality of performance and product. This also applies in challenging applications as Deltaflow can be supplied in materials which resist

especially corrosive or high temperature media. Finally, because Deltaflow is not sensitive to condensation or contamination, it is an ideal metering

tool for measuring sewage gasses and thanks to it’s stability in long-term use, it is particularly suitable for metering air flow.

The Deltaflow Series can be used on pipe diameters from 3mm up to 15,000mm and pressure ranges can span between 0 to100 bar, up to 0 to 690 bar. Turndown

is >1:30, bi-directional, temperature range from -200 to 1240?C and is available with options and accessories such as integrated pressure and temperature

sensors, weather-proof casing for harsh outdoor applications.   ENDS.

More information is available from:

Lincoln Austin, Flowline Ltd

Borehamwood, Hertfordshire, WD6 1RX, UK.

Tel: +44 (0) 208 207 6565.    Fax: + 44 (0) 208 207 3082

Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.         www.flowline.co.uk   
 

For example, in power plants Deltaflow meters all gaseous media reliably and precisely, including feed air, preheated air, recycled stack gas and flue

gas. In addition, it can meter media with extremely high particulate contents of <200g/m3,  (when used with the LSP air purifier attachment), live steam,

 low / medium-pressure steam and feed water, all tested per PED97/23/EG with CE certification.

The meters can also be used in chemical and petrochem industries for metering products, exhaust or flue gasses, inert or aggressive media. Deltaflow is

also ideal for measuring biogases and sewage gasses in the water and wastewater treatment industries.

In power plant applications, such as metering steam or feed water, the energy savings realised from using Deltaflow can ensure a rapid payback.           

                        
With Deltaflow exact measurements are possible of combustion exhausts from boilers and burnout slagging, therefore efficiency levels can be adjusted for

optimum performance. Furthermore, because pressure loss levels are so low, pumps, blowers and compressors with narrower profiles can be used which

results in energy savings.

In chemical and petrochem applications Deltaflow’s high degree of precision and accuracy (better than 1% of measured flow) can contribute toward

increased quality of performance and product. This also applies in challenging applications as Deltaflow can be supplied in materials which resist

especially corrosive or high temperature media. Finally, because Deltaflow is not sensitive to condensation or contamination, it is an ideal metering

tool for measuring sewage gasses and thanks to it’s stability in long-term use, it is particularly suitable for metering air flow.

The Deltaflow Series can be used on pipe diameters from 3mm up to 15,000mm and pressure ranges can span between 0 to100 bar, up to 0 to 690 bar. Turndown

is >1:30, bi-directional, temperature range from -200 to 1240?C and is available with options and accessories such as integrated pressure and temperature

sensors, weather-proof casing for harsh outdoor applications.   ENDS.

More information is available from:

Lincoln Austin, Flowline Ltd

Borehamwood, Hertfordshire, WD6 1RX, UK.

Tel: +44 (0) 208 207 6565.    Fax: + 44 (0) 208 207 3082

Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.         www.flowline.co.uk   
 

The principle that revolutionised compressed-air processing.  Now, this technology is standard worldwide. With a total of 1.5 million of units sold since its presentation in 1982, the electronically level-controlled BEKOMAT condensate drain has now reached a further international record.

Developed more than 25 years ago by BEKO Technologies GmbH, Neuss, the compressed-air specialist and system provider, BEKOMAT is regarded as the most effective, efficient, process-reliable and profitable condensate drain around. With the record of 1.5 million sold systems now reached, BEKOMAT from BEKO also proves to be the consistently most successful system of its type for original and retrofit equipment. The BEKOMAT series cracked the sales record of one million only just under three years ago.

The principle that revolutionised compressed-air processing.  Now, this technology is standard worldwide. With a total of 1.5 million of units sold since its presentation in 1982, the electronically level-controlled BEKOMAT condensate drain has now reached a further international record.

Developed more than 25 years ago by BEKO Technologies GmbH, Neuss, the compressed-air specialist and system provider, BEKOMAT is regarded as the most effective, efficient, process-reliable and profitable condensate drain around. With the record of 1.5 million sold systems now reached, BEKOMAT from BEKO also proves to be the consistently most successful system of its type for original and retrofit equipment. The BEKOMAT series cracked the sales record of one million only just under three years ago.

The principle that revolutionised compressed-air processing.  Now, this technology is standard worldwide. With a total of 1.5 million of units sold since its presentation in 1982, the electronically level-controlled BEKOMAT condensate drain has now reached a further international record.

Developed more than 25 years ago by BEKO Technologies GmbH, Neuss, the compressed-air specialist and system provider, BEKOMAT is regarded as the most effective, efficient, process-reliable and profitable condensate drain around. With the record of 1.5 million sold systems now reached, BEKOMAT from BEKO also proves to be the consistently most successful system of its type for original and retrofit equipment. The BEKOMAT series cracked the sales record of one million only just under three years ago.