Find ATEX, IECEx, Explosion Protection & Hazardous Area Content...

News

Why It Pays To Control Temperature, Whatever The Weather

Why It Pays To Control Temperature, Whatever The Weather

As the sun continues to shine on the UK throughout June, July and likely into August, training specialist Develop Training Ltd (DTL) is reminding employers that it pays to ensure a comfortable working temperature, whatever the elements throw at us.

Many people are aware there is a minimum working temperature indoors (usually 16C, or 13C where the work being done is strenuous) but that there is no equivalent statutory level for how hot a workplace can be. However, that doesn’t mean employers can ignore soaring temperatures on days when the sun shines or in hot workplaces.

The Health and Safety Executive states that for indoor working, employers must provide: (Read More)

Training Is Key As Firms Face Dash To Comply With New Electrical Wiring Regs

Training Is Key As Firms Face Dash To Comply With New Electrical Wiring Regs

Industry leading training provider, Develop Training Ltd (DTL), is warning that firms will face a dash for compliance when new electrical wiring regulations are released next month.

DTL says many firms will be caught unawares by the scope of the changes in the new British Standard requirements for electrical installations.

The Institution of Engineering and Technology’s 18th Edition Wiring Regulations, which form the basis of the updated BS7671:2018, will require significant retraining for all UK electricians. It is due for publication in July but the major changes to the previous edition have already been announced, and they look set to have a big impact on the UK’s 265,000 electricians and electrical fitters as well as the organisations that employ them. (Read More)

Rittal Publishes UL Regulations Advice

hes aug 18 17Rittal Publishes UL Regulations Advice

Rittal embraces the need for a high degree of responsibility for the safety of users and the electrical equipment its enclosures are designed to protect.  As such the company has a policy of always being on the front foot when it comes to fully complying with international regulations.

In the USA and Canada, for example, a machine cannot be commissioned until approved by the AHJ (Authority Having Jurisdiction) to confirm compliance with the valid regulations, (Read More) 

Staving Off The Future

hes aug 18 16Staving Off The Future

The innovative design of the HST (high speed turbo) compressor ensures that it runs at maximum energy efficiency through continuous upgrades – by retrofitting improved components as they become available. Mark Whitmore of BOGE explains.

There’s a term used by industrial suppliers that is guaranteed to make the blood boil for many of their potential buyers: ‘future-proofing’. The phrase is used – and, of course, mis-used – all too often. (Read More)

Dealing With Dust: The Effects Of Particulate Exposure

Dealing With Dust: The Effects Of Particulate Exposure

In a facility with many obvious industrial hazards, such as heavy plant and machinery, a bit of dust can seem innocuous.

It may be mandated that you wear some form of PPE to guard against this, but for many people it is still an irritant more than an active risk. As a result, protections against it can fall by the wayside and be ignored or improperly applied.

But while the impact of dust is not quite so obvious as a crush injury or amputation, the long term side effects can be severe. Silica dust, cleaning products and a variety of industrial chemicals can all impact on the condition of the lungs, causing permanent respiratory damage and an estimated 12,000 related deaths every year. Controlling this risk is simpler than you might think, and could save money as well as lives. (Read More)

Marstair and Ex-Machinery Explosion Proof Equipment Sign Partnership to Provide ATEX Air Conditioners for even the Harshest Environments

hes aug 18 15Marstair and Ex-Machinery Explosion Proof Equipment Sign Partnership to Provide ATEX Air Conditioners for even the Harshest Environments

Ex-Machinery from the Netherlands and U.K. based Marstair, team up to serve the marine and oil & gas market with entirely new HVAC & refrigeration products.

Product release ATEX zone 1 condenser (Read More)

Corrosive Fume Extraction in the Water Treatment Process

hes aug 18 14Corrosive Fume Extraction in the Water Treatment Process

To provide water that is safe for human consumption, there are a number of processes that the water treatment industry use.

Coagulation and flocculation are often the first steps in water treatment. Chemicals with a positive charge are added to the water. The positive charge of these chemicals neutralises the negative charge of dirt and other dissolved particles in the water. When this occurs, the particles bind with the chemicals  (Read More)

Manual Powder Processing Ignites Dust Cloud

hes aug 18 13Manual Powder Processing Ignites Dust Cloud

A huge range of industrial processes are susceptible to electrostatic charge generation, creating a risk of fires and explosions in hazardous areas.

In one case a manual powder processing operation resulted in the ignition of a dust cloud, caused by the accumulation of static electricity, as evidenced by the results of a thorough investigation, summarised here. (Read More)

Empteezy Endeavour To Protect Remote Workers

hes aug 18 12Empteezy Endeavour To Protect Remote Workers

With a variety of roles being carried out in the great outdoors involving fuels, lubricants, chemicals and agrochemicals, spill control and containment specialist Empteezy have expanded their range of portable eyewash solutions designed to protect those working without day-to-day facilities.

The need to have fast access to the right equipment to safeguard employees and the environment they are working in (Read More)

Hazardous Area Ex Personnel Competencies - All Described In IEC Standards

hes aug 18 11Hazardous Area Ex Personnel Competencies - All Described In IEC Standards

Hazardous area industries require competent people being active in all levels. Competency has to be shown both on theoretical and practical level. Competency is not just one-time exercise, it has to be refreshed in every 5 years to comply latest industry regulations and trends. Hazardous area competency (HAC) shall be the basis for both electrical and non-electrical explosion protection. HAC is an add on to one’s basic knowledge of being electrician or mechanical fitter (Read More)