News

How to avoid to become an Ex manufacturer?

In any possible hazardous environment you may find Ex certified devices, installations or even systems. The formula is kind of simple – as long as we do install, operate, maintain and repair as it should be, device is still Ex, and there shall be not any modification even in terms of legal considerations.

What is an Ex product?

• There is a manufacturer
• Product is Ex certified either by 3rd party (ATEX Notified Body, etc.) or manufacturer
• In case of ATEX Category 2 non-electrical devices there you might find a retention of documentation
• There is a manual focusing on Ex integrity
• List of Ex accaessories has been added
• Declaration of Conformity (Read More)

Cortem Group new NAV, NEV series cable glands

Cortem Group presents NAV and NEV, the new generation of cable glands for armoured and non-armoured cables.

NAV and NEV series cable glands are suitable for use in hazardous areas with danger of explosion to enable direct insertion of armoured and non-armoured cables into explosion-proof junction boxes, lighting  fixtures, plugs and sockets, etc. Thanks to their structure, they are particularly suitable both in harsh application, such as marine one, (Read More)

R. STAHL offers a range of conventional and LED lighting, ranging from linear, tubular, hand lamps, pendent lighting, & floodlights.

LED-based models such as the EXLUX 6002 and 6402 lines from R. STAHL, serve as very energy-efficient general lighting solution in Ex zones 1/21 and 2/22.

One 52 W model can replace two standard 36 W fluorescent lamps while ensuring a much better life span of 100,000 operating hours. Given a high luminous flux of 5,800 lm, (Read More)

How emergency lighting could revolutionise fire safety

Emergency lighting is seen as a requirement for most businesses, but its implementation is spotty, and usage scenarios vary.

With lighting only enforced in areas and escape routes where existing illumination is not sufficient, it’s easy for emergency lighting solutions to fall by the wayside, and either be ignored or implemented in a basic fashion as supplementary to other systems.

New technologies however could see a reappraisal of emergency lighting, as well as other means of safely escaping from a facility. Intelligent, networked solutions using the Internet of Things could allow us to track the conditions in a facility with greater specificity, calculating a response that’s more dynamic and safer for everyone involved. (Read More)

Honeywell Releases Comprehensive Guide To Hand Protection Regulations And Standards

Honeywell has published a free technical guide to the key regulations and standards that health and safety professionals need to comply with to ensure that workers’ hands are protected.

‘Key Regulations and Standards To Look Out For When The Hands Need Protection’ pays special attention to recent and forthcoming regulatory changes to glove standards, particularly those related to chemical (Read More)

Timothy Taylor’s Brewery - Efficient Sanitation Methods For Timothy Taylor’s Brewery

SOCOTEC – the UK’s leading testing, inspection and compliance company - has been working alongside Timothy Taylor’s Brewery to support their brewing process with efficient sanitation methods.

In the food and beverage industry, outstanding hygiene standards are paramount for both quality and food safety, as well as ensuring optimum performance of all equipment and processes.

Based in Yorkshire, Timothy Taylor’s is an independent, family-run brewery with 160 years’ experience, using the finest ingredients to brew the best possible beers. Landlord, a brewery favourite, has won more awards than any other beer.

Fermentation vessels are an essential component to any brewery, (Read More) 

Cost-Effective, 24/7 Leak Detection Based On Thermal Imaging

To remove the labour-intensive job of monitoring the integrity of pipeline networks, the video analytics specialist, IntelliView has developed a smart camera solution, at the heart of which, is FLIR thermal imaging technology.

Corrosion, ageing pipes and fittings are the common causes of leaks with control valves, pig traps and receivers, meters and pressure gauges being especially susceptible. Although leaks often start small, (Read More)

Peppers Cable Glands Limited

Peppers are a world leader in the design, manufacture and supply of Hazardous Area Connectivity Solutions for use within industries such as Oil, Gas, Marine, Petrochemical, Pharmaceutical and Food.

The Peppers product range includes a vast array of Elastomeric Seal and Barrier Cable Glands for use with armoured, unarmoured and conduit systems. Gland accessories specifically made for use with Peppers glands include locknuts, sealing washers, (Read More)

SIL3 Certification for the EHPC210 Diagnostic Controller

Bifold is pleased to announce that the Partial Stroke Function of the EHPC210 Diagnostic Controller is now SIL3 Certified according to IEC 61508 : 2010 Parts 1-7 and meets requirements providing a level of integrity to: Systematic Integrity: SIL3 Capable. (Read More)

9th ADDISBUILD (10-13 October 2018) - International Construction, Steel, Construction Machineries & Infrastructure Exhibition

Organized annually since 2010, Addisbuild is the longest standing construction event in East Africa. Due to the regular increase in exhibitor and visitor numbers, Addisbuild has a lot to offer for networking and finding business leads

Being just right in the action, the Addisbuild has always been the primary choice of international companies seeking to make business in Ethiopia.

In 2018, Addisbuild is going to be organized for the 9th time on 10-13 October. Join now and benefit the great trade and investment opportunities in Ethiopia and East Africa.

AddisBuild which has been held for 8 years in a row so far, which is the biggest construction (Read More)