Editorial

CSA Group Technical Assistance & Certification Key to Fast Market Access for Dynamic Safety International’s PPE Products

In the personnel protective equipment (PPE) manufacturing industry, technical expertise matters. Understanding how safety and quality are built into design and production, and ensuring that the appropriate tests and certifications are conducted can save time and money – leading to a more secure place in a highly competitive market. When a team of experienced executives in the industry started a new design and manufacturing company for PPE in 2009, they required some technical guidance. Though they had over 35 years in the industry, they turned to CSA Group to provide the technical expertise that could help further establish them as a reliable source for quality products.

DON’T FORGET YOUR LONE WORKERS, URGE LONE WORKER PROTECTION SPECIALISTS SBES

12-05 08Lone Workers can enjoy ATEX compliant protection

Legislation does not prohibit lone working in a general sense, but companies and organisations must conduct a risk assessment covering the activities of all employees, including lone workers. Since the Corporate Manslaughter and Corporate Homicide Act of 2007, companies and organisations can be found guilty of corporate manslaughter as a result of serious management failures resulting in a gross breach of duty of care.

Don’t Forget Your Lone Workers

12-05 07Peter Swan, MD of SBES, examines an often-overlooked issue

Lone working, which often takes place in isolated areas or at unsocial times, occurs across many different sectors including construction, labs, refineries, warehouses and data/server rooms. Safety of lone workers is vital for businesses, and employers have a responsibility to protect these workers, yet lone worker safety is an area that is often forgotten or neglected.

Lone Worker Protection – The Current Landscape

12-05 06Peter Swan, MD of SBES, examines an often-overlooked issue

Lone working, which often takes place in isolated areas or at unsocial times, occurs across many different sectors including construction, labs, refineries, warehouses and data/server rooms. The Office of National Statistics estimates that there are around six million lone workers in the UK.

Safe & Efficient Drum Handling In Hazardous Areas

Do you have a need to lift or move drums, de-palletise or just generally move drums around a workshop or factory site in Hazardous Areas.

The St Clare Engineering range of Grab-O-MaticATEX fork attachment and pedestrian drum handlers will provide a safe and efficient solution for you.

The popular and versatileGrab-O-Matic DLR range of rim grip fork attachment drum handlers are suitable for all types of steeldrums, plastic ‘L’ ring drums and most fibre drums.

The extensivedrum handling range includes the SC10 for lifting and rotating drums to dispense the contents, scissorgrabs, base gripping units and waist grippers, the whole range can also be fitted to pedestrian stackers for use in confined spaces and places where fork trucks are banned. Bespoke units can be manufactured to suit customer specification.

We also have arangeof Drum Cages for off-shore use and fork attachment Whiskey/Wine Barrel Base Grippers for use in the drinks industry.

We have also developed a Quick Attach/Release drum handler fork attachment for use in ATEX hazardous areas. 

All Grab-O-Matic models can be Quick Attach/Release units and are securely attached to the forks and released without the need for the truck driver to dismount from his cabsaving time and increasing safety!

The drum handlers can be manufactured completely from stainless steel or part stainless steel to suit customer requirements and the spark proof area the units are operating in.

All Grab-O-Matic fork attachments are issued with Test Certificates, CE marked and manufactured entirely in the UK to ISO 9001:2015 and will be certified for use in ATEX spark proof areas.

For more information on our extensive range of drum and materials handling equipment please contact Andy Bow on 02380 64340or email This email address is being protected from spambots. You need JavaScript enabled to view it.

This article can also be found in the Jan/Feb issue.

 

 

Safe & Efficient Drum Handling In Hazardous Areas

 

Do you have a need to lift or move drums, de-palletise or just generally move drums around a workshop or factory site in Hazardous Areas.

The St Clare Engineering range of Grab-O-Matic ATEX fork attachment and pedestrian drum handlers will provide a safe and efficient solution for you.

The popular and versatile Grab-O-Matic DLR range of rim grip fork attachment drum handlers are suitable for all types of steel drums, plastic ‘L’ ring drums and most fibre drums.

The extensive drum handling range includes the SC10 for lifting and rotating drums to dispense the contents, scissor grabs, base gripping units and waist grippers, the whole range can also be fitted to pedestrian stackers for use in confined spaces and places where fork trucks are banned. Bespoke units can be manufactured to suit customer specification.

We also have a range of Drum Cages for off-shore use and fork attachment Whiskey/Wine Barrel Base Grippers for use in the drinks industry.

We have also developed a Quick Attach/Release drum handler fork attachment for use in ATEX hazardous areas.

All Grab-O-Matic models can be Quick Attach/Release units and are securely attached to the forks and released without the need for the truck driver to dismount from his cab, saving time and increasing safety!

The drum handlers can be manufactured completely from stainless steel or part stainless steel to suit customer requirements and the spark proof area the units are operating in.

All Grab-O-Matic fork attachments are issued with Test Certificates, CE marked and manufactured entirely in the UK to ISO 9001:2015 and will be certified for use in ATEX spark proof areas.

For more information on our extensive range of drum and materials handling equipment please contact Andy Bow on 02380 643402 or email This email address is being protected from spambots. You need JavaScript enabled to view it.

Hiab launches new 90 tm heavy range loader crane — HIAB iQ.958 HiPro

CARGOTEC CORPORATION, TRADE PRESS RELEASE, 8 SEPTEMBER 2022 AT 10:00 AM EEST

Hiab, part of Cargotec, launches the new HIAB iQ.958 HiPro heavy loader crane with the new advanced operating system SPACEevo to improve productivity and safer operation. Due to its design, it delivers an excellent lift-to-weight ratio. The crane will be exhibited by Hiab at IAA, pavilion P35, in Hannover, Germany, 20 - 25 September.

The HIAB iQ.958 HiPro is a 90 tonne metre (tm) heavy range crane. It is the second model in the iQ range with the advanced technology platform introduced with the HIAB iQ.1188 HiPro.   

The HIAB iQ.958 HiPro structurally builds on the V12-Power boom shape design for the crane and the JIB. The result is an extremely light and compact crane with an under two metres side section that can be installed on smaller trucks within the 4 axle 32 tonnes GVW (gross vehicle weight) category, leaving plenty of loading capacity that can reduce the number of trips needed. The lower vehicle weight when unloaded and subsequent need for fewer trips contributes to lower fuel consumption and reduced CO2 emissions in the customer’s operation. 

The crane uses the new control system SPACEevo that enables precise operations even at high speeds. It also offers advanced safety and productivity features like VSL+ (Variable Stability Logic PLUS) that can maximise the lifting capacity by calculating the stability according to the position of the stabiliser legs and the actual total weight of the truck.

The DLC-S (Dynamic Load Chart) lets the operator set up the crane quicker by simulating the load capacity before opening the stabilisers, avoiding lost time in finding the correct stabiliser position for maximum lifting. This can be done from the comfort of the truck cabin, particularly handy when operating in adverse weather conditions. 

The standard XS Drive remote control can be substituted with the new optional CombiDrive 4 remote control. It enhances the crane operation with new safety features such as Confirm View to find the best field of view, three high definition and bright colour displays and a long-lasting battery with single-user operator personalisation settings.

“The HIAB iQ.958 HiPro is a technologically advanced crane for its category, offering great performance for a wide variety of lifts both in horizontal and vertical positions. The crane offers among the best in class lifting performance when using the eighth extension in combination with the JIB with six extensions (JIB 155Q). This maximises the available JIB power to provide superior load capability,” says Marcel Boxem, Director, Global Product Management, Loader Cranes Heavy & Super Heavy, Hiab. 

The new models will also be offered in non-CE versions, equipped with the control system Space X4 and the optional CombiDrive 3 remote control.

Highlights 

  • 90tm range category
  • SPACEevo control system.
  • New, advanced V12-Power dodecagonal shaped boom and JIB profile for lightweight and compact frame size fitting within a built in space of two metres and below the 4 metres height of passage doors with all the options and JIB installed.
  • An all-purpose crane that delivers the performance of its category with the weight and frame size of the range below, increasing the available payload and making it possible to install on smaller truck sizes (4 axle 32 tonnes GVW) while keeping installation and running costs the most convenient possible.
  • Variable pump, for increased flow performances and reduced fuel consumption
  • nDurance nano-based technology coating assures long-lasting protection of the crane and its parts from corrosion, rust or external environmental factors that would affect its appearance and residual value over time.
  • HIAB iQ.958 HiPro has in-built connectivity so that owners can access Hiab’s HiConnect™.
  • CE marked
  • Non-CE version available

A Guide to the European Standard for Safety Storage Cabinets (BS EN 14470-1)

11-dec-art2Author: Greg Smith, Labtex

In this Labtex White Paper:
•    Safety Storage Cabinets Overview
•    What must a Safety Storage Cabinet be able to do
•    A comparison of the fire resistance of cabinet constructions
•    Consequences of the standard in Europe
•    Approval documentation
•    Conclusion

Pioneer Safety Group expands its Ex offering with the acquisition of a UK based Ex lighting solution provider

 

The Pioneer Safety Group, which is a worldwide leader for explosion protection solutions, Ex products and industrial safety solutions and part of the Longacre Group, has acquired Petrel Limited, a UK based manufacturer of explosion proof lighting solutions. 

Petrel, based in Birmingham, has over 40 years’ experience in the design and manufacture of Ex lighting products suitable for a range of industries and hazardous area classifications.  Petrel also provides bespoke lighting solutions through its lighting design service which optimises the layout for the users and minimises costs for the facility.  Petrel sells through distributors and strategic partners to provide end users, system integrators and OEMs their high-quality lighting solutions which proudly bear the “Designed and Made In Britain” marking.   

Steve Noakes, Pioneer Safety Group’s MD said, “The Pioneer Safety Group has a long history in supplying trusted explosion protection solutions across a wide industry base, and the addition of Petrel broadens the complementary product portfolio to our customers. Its long history in Ex lighting further strengthens the brand pedigree of the Group and marks another milestone in the exciting growth strategy for the Group.” 

Mark Pemberton, Petrel’s MD said, “Joining Pioneer Safety Group is an exciting opportunity for Petrel.  Our products complement the existing brands to provide a comprehensive range of solutions to our customers.  We have common values and the Group’s technical and operational experience, the ability to access and expand our global distribution network, and the Group’s commitment to people development will help Petrel achieve its exciting growth ambitions.” 

Kevin Price, Chamberlins CEO said “The Petrel team have made huge progress over the last 2 years, implementing its new strategy and delivering record profitable growth. The Chamberlin Board now believe the time is right for Petrel to continue that journey as part of a Group that has the resources and strategic fit to deliver on its true potential. We believe that the Pioneer Safety Group is the ideal new owner for the business and are well positioned to support Petrel and the ongoing development of its strategy.”

Visit the Petrel website - https://www.petrel-ex.co.uk/

Visit the Pioneer Safety Group website - https://pioneersafetygroup.com/

Please click the link below to view and download the images.

Petrel-Logo-2018-NoStrap-Web-Trans-BG

Pioneer Safety Group Full-Logo

 

 

Pioneer Safety Group provides industrial safety solutions to businesses all over the world.

Headquartered in the UK, companies in the group provide a wide offering of products and services, including consultancy for hazardous area operations, explosion protection equipment and components, fire risk management and much more.

Services are delivered through seven brands including PyrobanEXSolutionsPyropressEuro AccessEx-tech SignallingEx-tech Solution, and Petrel.

https://pioneersafetygroup.com/

About Petrel Ltd.

Petrel, based in Birmingham, has over 40 years’ experience in the design and manufacture of Ex lighting products suitable for a range of industries and hazardous area classifications.  Petrel also provides bespoke lighting solutions through its lighting design service which optimises the layout for the users and minimises costs for the facility.  The company became part of the Pioneer Safety Group in 2024, and was previously part of the Chamberlin & Hill group since 1979.

https://www.petrel-ex.co.uk/

 

 

 

 

Rugged, versatile and reliable

The Peli™ range of ATEX approved torches was recently on display on the Peli Products (UK) stand at Offshore Europe exhibition in Aberdeen where it proved hugely popular. Peli torches are renowned for rugged reliability and each torch in the safety range is certified to ATEX requirements, for use in potentially explosive atmospheres such as silos, tanks and chambers where an individual may be exposed to a range of potential hazards.

Right angled, hands-free

The Peli™ 3415 Zone 0 is a versatile, right-angled torch designed specifically for use in hazardous areas.  It features a 90° articulating head to angle the light where required.  An integrated clip easily attaches to clothing for hands-free light.  There is also a heavy-duty magnet; allowing the torch to be attached to steel surfaces, again allowing the user to keep their hands-free.
This model boasts three light modes – Flood for wide light, spot for a focussed beam and flood/spot combined.  Available in high vis yellow, the 3415Z0 is waterproof and provides up to 15 hours of runtime with a beam distance up to 135 metres.

peli1.jpeg

Slim and compact

The slimmest safety torches in the range are the Peli 1975 Zone 0 and Zone 1 models.

These compact penlights are rugged and durable for tough work environments.  They feature a secure clip to attach to clothing.  Small in size and lightweight at only 54 grams yet they output a powerful 117 (Zone 0) and 94 lumens (Zone 1).  The 2 AAA batteries last for more than 8 hours (Zone 1) and 2¼ hours (Zone 0).The Zone 0 version is manufactured with an anti-static body and shroud and both versions can be helmet mounted using the clip which is available as an accessory.

peli2.jpeg

Rugged and powerful

From slim and compact penlights to a rugged hand lamp, the Peli 9415 Zone 0 illustrates the diversity of the range.  It packs a powerful beam which cuts through smoke and fog.    The ATEX Zone 0 rating ensures the light can be used in hazardous areas and features a sure grip handle for a comfortable and non- slip grip with an extra-large space to accommodate gloved hands.

The 9415 is designed to stand on end and the 120° pivoting head allows the user to angle the beam exactly where required.  There are 3 light modes: High, Low & Flashing and a battery charge level indicator (Green, Amber, Red).

peli3.jpeg

Professionals have chosen the Peli brand for many years; trusting in the reliability, performance and durability of the products in the most testing conditions. 

For more details telephone 01457 869999 or go to www.peliproducts.co.uk.