FibreGrid’s GRP Walkway System: High Performance, Low Maintenance

Walkways are dangerous enough places at the best of times, so ensure they are as safe as they can possibly be by installing FibreGrid’s unique GRP Walkway System, which has all the benefits of traditional steel or aluminium, but none of the drawbacks.

Wherever there is a chance of slips, trips or falls, our grating comes into its own as it is slip resistant. But that’s not all. It is also chemical resistant, fire retardant and, unlike metal, won’t spark, (Read More) 

so can be used in sensitive areas. Lightweight to fit and easy to clean, it won’t buckle either.

We’ve fitted grating in many challenging locations, such as by railway tracks, as well as on an old pontoon for the Port of Ipswich (where a slip would have meant a fall into the chilly River Orwell), or at Sky TV’s HQ. So, you’ll be in good company.

Standard colours are green, yellow and grey, but bespoke versions in virtually any colour can be produced.
Our twin grid grating is available in a variety of different thicknesses and panel sizes. This grating is ideal for overhead walkways where a smaller mesh is needed, as it meets the European 15mm ball falling test.

Also available is our standard, and bestselling, grating which has a grit embedded surface to stop slips.  This comes as square mesh at 38mm or 50mm hole sizes and thicknesses of 25mm, 28mm or 50mm. If you need a structural grating, but don’t need mesh then the grating can have a 4mm top bonded to the top surface. This applies to any of our standard mesh gratings.
Choose from different mesh sizes, or a covered top. With over 40 different grating types available, in a selection of different panel sizes, make FibreGrid your first choice for grating.

Visit www.fibregrid.com or call us on 01440 712722 for friendly advice.